MORE DETAILS ABOUT PRODUCT
12' PORTABLE PROPANE HOSE KIT WITH REGULATOR AND FITTINGS
The NPSK Accessory Kit will allow a generator to be disconnected from the low pressure side of the home system and hooked up to a cylinder. Propane cylinders can be used to operate a low pressure propane or natural gas generator portably. Two kits are available. They are both the same except for the length of the rubber hose. Choose from a six foot or twelve foot hose kit. Both of the NPSK Accessory Kits include: Special High Volume-Low Pressure Regulator for up to 20hp engines
* 3/8" Flare Swivel Hose ends
* Left Handed Cylinder Fitting-Works with ALL Cylinders, New or Old Style including OPD
* Includes both Brass adapters for the engine regulator and low pressure regulator
Properly sized to match the Generator Regulator Inlet Fitting The hose in this kit cannot be used to make the final connection to the stationary Natural Gas system for engines over 5hp. This hose kit is NOT recommended for engines above 20 HP THIS IS A HIGH VOLUME AVERAGE DEMAND HOSE KIT..This hose kit can be used on larger HP generators but based on the load and altitude the regulator may freeze up that is why the MFI PGK kit is recommended for larger HP engines...
The NPSK Accessory Kit will allow a generator to be disconnected from the low pressure side of the home system and hooked up to a cylinder. Propane cylinders can be used to operate a low pressure propane or natural gas generator portably. Two kits are available. They are both the same except for the length of the rubber hose. Choose from a six foot or twelve foot hose kit. Both of the NPSK Accessory Kits include: Special High Volume-Low Pressure Regulator for up to 20hp engines
* 3/8" Flare Swivel Hose ends
* Left Handed Cylinder Fitting-Works with ALL Cylinders, New or Old Style including OPD
* Includes both Brass adapters for the engine regulator and low pressure regulator
Properly sized to match the Generator Regulator Inlet Fitting The hose in this kit cannot be used to make the final connection to the stationary Natural Gas system for engines over 5hp. This hose kit is NOT recommended for engines above 20 HP THIS IS A HIGH VOLUME AVERAGE DEMAND HOSE KIT..This hose kit can be used on larger HP generators but based on the load and altitude the regulator may freeze up that is why the MFI PGK kit is recommended for larger HP engines...
YOU MAY ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)
-
EF1000iS Y
EF10iSX-BNDL
-
EF2000iSV2
EF20iSV2-BNDL
-
EF24iSHX Y
EF24iSHX-BNDL
-
EF30iSEBX
EF30iSEBX-BNDL